Everything You Need To Know About The Caterpillar C15 | Highway and Heavy Parts | Diesel Engine Parts (2024)

The History of Caterpillar

In the late 1800s and early 1900s, steam tractors were the primary method of agricultural development. But out in California, they had a problem: the incredibly heavy tractors kept sinking into the soft earth. One solution sometimes used was to lay wooden planks ahead of the tractors, but this drastically decreased speed and was expensive to do.

In 1904, Benjamin Holt came up with the brilliant idea to attach the planks to the tractor, creating a track that replaced the wheels. The unique way Holt’s tractor moved was compared to a caterpillar, giving the new tractor design its name. In 1925, Holt Manufacturing Company merged with C. L. Best Tractor to form a new company with a name that reflected the product that had become so famous.

Both Holt Manufacturing Company and C. L. Best Tractor had great success during WWI, but floundered after peace was reached. The two competitors merged because of their financial struggles. To come back financially, Caterpillar had to do a couple of things. First, they began making diesel engines in 1931. They also began to focus on developing construction equipment. This change did very well for them, as the company thrived during the post-WWII construction boom.

Having successfully conquered the construction market, Caterpillar began branching out in the late part of the 1900s. They began building truck engines for both on- and off-highway applications, and they entered the global market. In 2008, they exited the on-highway diesel engine market, since 2010 EPA standards would lead to expensive changes and the market accounted for a small percentage of their sales.

Caterpillar C15

Caterpillar first started manufacturing the C15 in 1999, and didn’t stop making it until 2007. Keep in mind that this article is about the single-turbo C15s, and not the ACERTs (though look out for that one in the future!). The C15s, especially the early ones, are known to be good and reliable engines.

They are one of the engines we sell parts for the most, since they are so popular. The early C15s with a 6NZ serial number prefix only have one turbocharger and simple electronics, and weigh less than the 3406E, which was the C15s predecessor.

Many parts are interchangeable between the 3406E, C15, and C15 ACERT, but there are slight differences that are very important to note. Caterpillar made the C15 to improve on the 3406E. The C15s see less oil leakage than the older design. They also have relief slots in the bottom of the cylinder head to keep the head gaskets from getting crushed.

Don’t let the naming of the C15 ACERT fool you. Many people think that the ACERT is different only because of the second turbocharger, but that is far from true. The ACERTs actually have the same stroke as the C16s. They also have a completely different piston design. The ACERTs have the one-piece steel pistons, as opposed to the C15s two-piece, aluminum skirt piston design. There’s also the whole emission technology thing that gives the ACERT its name, too.

C15 engines are on-highway engines. They can be found in Peterbilt and Kenworth trucks.

Looking for more information on these three engines? Check out our post on the differences between the C15, ACERT, and 3406E.

Common Caterpillar C15 Failures

Now, remember those relief slots mentioned above? While a great idea, it has been noticed by multiple shop techs that head gaskets tend to fail a little more often since those slots were introduced. That being said, if you keep an eye on it and buyquality gaskets,it shouldn’t be too much of an issue.

Another big problem Caterpillar had with the C15s was the Bridge engines. Bridge engines are C15s made in 2002 and 2003 with an MBN serial number prefix. They were meant to bridge the gap between the pre-emissions 6NZ and the emissionized ACERT engines.

They are widely known to perform poorly, even earning them the joking expansion of Much Bad News for MBN. The stock engines do not pull well, the exhaust temperatures run high, and they have terrible fuel consumption. Many people with the engines have either replaced them or updated the ECM to codes for a different engine.

Aftermarket Improvements of the Caterpillar C15

After the C15 was on the market long enough, aftermarket companies got their hands on it and do what they usually do: make improvements! Since Caterpillar debuted the C15, the aftermarket manufacturers have spent a lot of time improving the original designs that Caterpillar engineered.

The piston skirts have a graphite coating to help keep them from seizing in the cylinder. The rod and main bearings are constructed from a tri-metal blend to increase durability. The cylinder liners are also induction hardened, which reduces bore wear.

Though not an improvement in engineering, all of HHP’s aftermarket in-frame or out-of-frame rebuild kits will have brand new pistons. When you buy kits from Caterpillar, the pistons in the kit are used – that’s why they make you pay a core charge.

Caterpillar C15 Engine Specifications

435/500 hp MT-T4, 455 hp MT-T4, 475/500 hp MT-T2, 500 hp MT-T2

• Bore: 5.4 mm, Stroke 6.5mm, Displacement: 893 cubic in
• Aspiration: Turbocharged for ATAAC
• Rotation from flywheel end: Counterclockwise
• Cooling system: 5.5 gallons
• Weight, Net Dry: 2695
• Dimensions: 57.2 length, 39.3 width, 49.7 height

C15 has Multi-Torque (MT) Operation
For best balance between fuel economy and performance requirements on line-haul vehicles with 80,000 lbs. or less, use the following guidelines:

• For 9, 10, or 15 speed single overdrive transmissions, gear to cruise at:
• 1550 rpm @ 65 mph for 410 hp and below
• 1500 rpm @ 65 mph for 435 hp and above
• For 13 or 18 speed dual overdrive transmissions, gear to cruise at:
• 1450 rpm @ 65 mph
• Maximum recommended engine speed at cruise 1550 rpm

Caterpillar C15 Featured Products

We have a very large offering of parts for C15s of all ESN prefixes. The ones below are some of our most popular.

177148 | CATERPILLAR C15 TURBOCHARGER, NEW (0R7923)

P126001

Everybody loves a good turbo, and here at HHP, we won’t sell you a bad one. This particular turbo is made by manufacturers that supply the OE, so you know they’ve got the manufacturing process down.

All components are thoroughly inspected for fit and finish before the turbo is even put together. Each turbo is perfectly balanced to ensure long-lasting and dependable power. Don’t mind a remanufactured turbo and want to save a few extra bucks? We’ve got that too.

10R1000 | CATERPILLAR C15 ACERT, C15 DIESEL FUEL INJECTOR, REMANUFACTURED (2295919)

P016876R

Have you heard us talk about Delphi fuel injectors yet? Well, if you haven’t, here’s the quick and dirty. Delphi makes pretty amazing fuel injectors, especially for C15 engines.

This particular injector is guaranteed to have a new nozzle for proper fuel flow and atomization. It also has a completely new actuator assembly, including spill valve, NOP spring, washer, shim, and stop. And all the o-rings are brand new too. That’s a lot of new in a remanufactured injector.

Related Articles:

WHAT YOU SHOULD KNOW ABOUT THE CAT 3406E/C15 DIESEL ENGINE TURBOCHARGER

ABOUT THE CAT C15/C15 ACERT/3406E DIESEL ENGINE CYLINDER HEAD

ABOUT THE CAT C15/C15 ACERT/3406E STAGE 4 PERFORMANCE DIESEL ENGINE CYLINDER HEAD

ABOUT THE CAT C15/C15 ACERT/3406E STAGE 3 PERFORMANCE DIESEL ENGINE CYLINDER HEAD

ABOUT THE CAT C15/C15 ACERT/3406E STAGE 2 PERFORMANCE DIESEL ENGINE CYLINDER HEAD

Related Videos:

Short on Time? Take your Quote Online!

We get it- when you need Diesel Engine Parts, time is of the essence. That’s why we’ve developed the HHP Online Quoting System.

Do you need replacement parts for your diesel engine? Call our ASE Certified Techs at 844-304-7688. Or, you can request a quote online.

Originally Posted June 13, 2017; Edited March 5, 2020